We use cookies to make your experience better. To comply with the EU GDPR e-Privacy directive, we need to ask for your consent to set cookies. Learn more.
0 Reviews
190mm x 14/3mm x 1900mm Oiled Oak Classic Engineered Wood Flooring
Product Code: FSOE14992Y
£43.48 per m2 (inc.VAT)
(£125.58
per pack)
BULK PRICING (inc.VAT)
0 Reviews
PRICE YOUR ROOM BELOW
-
Width
190mm -
Thickness
14mm -
Wear Layer
3mm -
Length
1900mm (1 split board) -
Finish
Natural Oiled
- Product Info
- Description
Product Code
FSOE14992Y
Species
Oak
Width
190mm
Thickness
14mm
Wear Layer
3mm
Length
1900mm (1 split board)
Finish
Natural Oiled
Grade
Rustic Grade
Installation
Tongue & Groove
Suitable for underfloor heating
If Fully Adhered
Bevelled Edges
Yes
Our Oak Oiled engineered flooring has 190 mm wide boards with a thickness of 14 mm and a 3 mm wear layer. Long 1900 mm long boards, although please expect a split board in each box.
This is to create that natural stagger and look when installing, this floor can be installed as a floating floor or secured directly to the sub floor with no underlay. It has a tongue and groove fixing system.
This is a natural product with a classic grading, it will have knots and sapwood and will vary in colour. The natural oiled finish is absorbed into the hardwood wear layer, accentuating the grain of the wood.
The sub floor must be flat, dry and free of debris. Manufacturer guidelines need to be followed at all times when installing your new floor.
Ideally Floorsave would recommend an additional coat of oil is applied once the product is installed.
We recommend that customers order a free sample, before purchasing, as photographs can only show a representation of the real product.
This is to create that natural stagger and look when installing, this floor can be installed as a floating floor or secured directly to the sub floor with no underlay. It has a tongue and groove fixing system.
This is a natural product with a classic grading, it will have knots and sapwood and will vary in colour. The natural oiled finish is absorbed into the hardwood wear layer, accentuating the grain of the wood.
The sub floor must be flat, dry and free of debris. Manufacturer guidelines need to be followed at all times when installing your new floor.
Ideally Floorsave would recommend an additional coat of oil is applied once the product is installed.
We recommend that customers order a free sample, before purchasing, as photographs can only show a representation of the real product.
We found other products you might like!
