To infill the last row of flooring can present quite a challenge. Here are a few tips to help you on your way.

Firstly, connect the boards together along the length of the room and line these boards up on top of the last row of flooring you have just installed. Then get one additional board and place this against the skirting overlapping the row you have put on top.

Then, with a pencil, run a line down the whole length of the room. Once you have done this, zig zag those parts that are to be taken off.

Take each board to your table saw and cut along the line. Once all the boards are cut install them, they may not fit tight so use your pull bar to make sure the flooring is all tight and secure.